Nirvana42o0
Do-Si-Dos - Auto
Summer 2025
Gorilla Glue #4 Autoflower (Seed Supreme), 70% coco / 30% perlite, 5-gallon fabric pots, Spider Farmer SE4500, 20/4 (off 3 AM – 7 AM), Canna A+B, Cal-Mag, Rhizotonic, Cannazym, Boost Accelerator -water source: Tap water ~110PPM, Closet grow, temp ~78–80°F, RH ~50–60%.
Do-Si-Dos
Day 51 (Week 8)
Autoflower
11 updates
46 photos
Day: 51
Autoflower
Flowering is coming nicely! I’m working with a PH of 5.7 and an EC of 1.6-1.8 so far so good! A little burn on the lots of the leaf so I’m dialing back on the feed a bit but she seems to be drinking a whole pot in 2 days so it’s been hard juggling work and feeding her. Hopefully I can fix the clawing on the sugar leaves. If anyone has any advice, please feel free to share. Happy growing! 🌺🤙🏼
a day ago
jake710420 Most likely some mild nutrient burn from overfeeding and lower pH, leading to clawing and yellow tips. it’s likely that some nutrients are over-available, causing tip burn and possibly the sugar leaves to as their more sensitive, it’s less severe then fan leaves an typically won’t harm the yield if it’s only a few. Secondary factors, Could be slightly high temps or humidity, so keep an eye on that as well. I’d try and bring the ph closer to 6.3–6.5. This will reduce nutrient over-availability and help stabilize uptake. Then I would also cut back on the strength of nutrients lime 10-15% maybe try doing 3/4 strength instead of full strength feeding when you do to flush some salt build up out, and lower the ec a bit as well this way since it’s acceptable but on the higher end, make sure your switching nutes from veg to bloom which means less nitrogen and more phosphorus and potassium, they will recover in the new growth slowly if this is what’s doing it, but that’s where I would start personally.
jake710420 ***On the strength of the nutrients down like 10-15%*** not lime 😂
Nirvana42o0 Thanks man! Will do that and see what happens. I’m running Canna nutrients and I used PK13/14 too early so I think that’s where I burned the leaves. It was an EC of like 1.9 which is too high and the pot always dries out completely in 2 days so the salts really go up! I flush them out every feed with 3 run offs and each one lower than the last but since I’m doing coco the PH 5.7 is perfect! 👌🏼 I want the run off to be as high as 6.2
View 4 additional comments
Day: 42
Autoflower
Flowering is coming nicely! EC: 1.6 PH: 5.72 Everything is looking great! I just added some CO2 to get my PPMs up to 900-1000 with my temps at 82.2F it should do some great magic! Just bulk up and tighten up and make the nugs denser. My plants drinking through everything so fast right now! I have to feed it every 2 days! I should also probably get the Canna Pk. Let’s do it!
11 days ago
Day: 40
Autoflower
🌡️ Temp, Humidity, and VPD • Temp: 80.3–81.6°F → This is right in the sweet spot for flower, especially since I’m supplementing CO₂. •Enriched grow room target: 900–1200 ppm (with sealed tent, more light, and high airflow) • Humidity: 49–50% → Excellent for mid–late flower. This will reduce mold risk and keep my buds dense. • VPD: 1.75 kPa → That’s nearly textbook perfect for flower (ideal is ~1.5–1.8 kPa). This means my plants are transpiring efficiently without being stressed.
13 days ago
Day: 37
Autoflower
Buds are starting to come in! About 1~ week into flower. Doing great!! Growing big! Temps: 76.9F RH: 55% VPD: 1.40 kPa Par: 600 PPFD
15 days ago
Day: 33
Autoflower
Justq did some lolippoping. I only did 20-25% of the bottom since it’s an Auto flower I would rather lollipop in two sessions to not stress out the plant so much since they have their own inner clock and I can’t control it as much without stunting growth… which is why I will probably never do autos again but it was a fun experiment. Anyways! So now I’m gonna feed it. I use ChatGPT to dial in all my cannabis needs. It’s great! Now I’m going to feed with my new bottles I got of Cannazym and Boost Accelerator from the CANNA Coco line. So far so good. I hate using tap water though because it buffered my PH up every time locking out Magnesium, Calcium and other micro nutrients. So today I will go get a bunch of distilled water with (no minerals added). Wish me luck! Happy growing!
20 days ago
TerpeneGalore I’ve been watering my crop the entire grow with 7.1 hose water. My first feeding during flower finally got 6.0 ph water using ph down and ph tester. Finally
Nirvana42o0 Nice man! 7.1 is high but 6.0 is definitely better! You growing in soil or coco?
TerpeneGalore Garden soil it’s no specified for potting mix but they still thrived. I now have ph adjusted soil with lime, perlite, etc. Specifically for acidic plants. You can see the new soil in the seedling that I posted
View 4 additional comments
Day: 32
Autoflower
Just found out today that this is NOT 🚫 GORILLA GLUE #4 … I had received free seeds for my purchase and I planted those by accident. So I’m actually growing some Do-Si-Dos Autoflower, feminized…. But whatever I’m so ready to get back to Photos. 😵 cheers and peace! ✌️
21 days ago
cpax Looks like it’s going to be a biggin keep growing.
Nirvana42o0 I’m hoping man! Fingers crossed! Thanks Cpax!!
Day: 28
Autoflower
Just got home from my trip and forgot to set the drip system timer to ON. And honestly it was fine! Looks amazing and smells amazing! I had just flushed the coco before leaving. So, drenching it in PH balanced feed and perfect PPM count really payed off! Had some good runoff and I couldn’t be happier! Keep an eye out on my next grow I’m gonna start tomorrow in DWC! Stoked! Peace! ✌️
25 days ago
Day: 27
Autoflower
This is blowing my mind! ; I have the VIVOSUN camera on my plant to check on it while I’m out of town and this is the picture I got. It’s the 5 days since my last post and looking huge! At least from the last post I mean. Still it’s only 4 weeks old but really bombing out right now!! I’ll get more of an update in a couple days when I get home but I’m just really happy to see the progress since the root issue I hate before. Thanks to everyone for chiming in on my grow! I love you all and hope to get this little girl flowering soon! Cheers!
a month ago
Day: 23
Autoflower
Had a bit of a swing in my reservoir. Had it all corrected today but other than that everything looks awesome! The lights running at 50% and the temps are at 77F with RH: 52-69. Cleaned everything and reset the feed. PH: 5.78 👌 and PPM: 559 right in the sweet spot! I leave for 5 days tomorrow. So fingers crossed everything goes well. I’ll check levels in the morning and correct anything but other than that… it’s off to the races. I changed my drip schedule 2 times per day for 20 minutes to get some good runoff. My run off should be in the PH range of 5.8 - 6.3 and if it hits 6.5+ time for a flush. And I want the PPMs to not spike above 600 - 650. We’re gonna check how it goes in 6 minutes here when the timer goes off and starts dripping. -> Run off at first was 522 PPM and 6.53 PH. Towards the end of the feed it went to 591 PPM and 6.45 PH. —— so to fix this I put my reservoir PH down to 5.56 and hopefully it’ll level it out in the root zone. And it always slowly rises after a few days so it’s perfect. Fingers crossed 🤞 we’ll see what the update is when I get home.
a month ago
Day: 11
Autoflower
Just added Rhizotonic to the party! Finally setup my drip system 100% complete. Still monitoring it to make sure it’s working well… everything is looking good. 👍🏻 PPM: 435. PH: 5.83. see ya next one! 🌺 aloha!
a month ago
Day: 7
Autoflower
Everything is looking good and on schedule. Time to up the feed by a bit. This is my first time ever running an Auto-flower. Fingers crossed. 🤞
a month ago